How to Replace the Kickstand on Your Ausom Electric Scooter

Replacing the kickstand on your Ausom L1 electric scooter takes just 10 to 15 minutes with basic tools and the right replacement part.

Updated 16 Aug 2026 5 min read 7 sections

Replacing the kickstand on your ausom l1 electric scooter takes just 10 to 15 minutes with basic tools and the right replacement part. Whether your kickstand broke from wear, bent after a fall, or simply wobbles too much to hold your scooter upright, the fix is straightforward.

Why Ausom Electric Scooter Kickstands Fail

Kickstands take constant abuse. Every time you park, the full weight of your scooter rests on a small pivot point. Over time, three common issues emerge:

Bent or warped metal from repeated stress or a hard impact
Stripped mounting bolts that no longer hold tension
Broken spring mechanisms that prevent the kickstand from retracting cleanly

The Ausom L1 weighs roughly 40 pounds, so even minor damage to the kickstand can make parking unstable. If your scooter tips over regularly or the kickstand drags while riding, replacement is the only real fix. Attempting to bend a warped kickstand back into shape rarely works and weakens the metal further.

Tools and Parts You Need

Before you start, gather these items:

Ausom scooter kickstand accessory — Scooter kickstand$15.00Image from the merchant

Replacement kickstand compatible with Ausom models (the scooter kickstand that fits the L1, L2, and DT2 Pro)
4mm or 5mm Allen wrench (check your scooter’s bolt size first)
Adjustable wrench or pliers for holding the nut
Threadlocker (optional but recommended for vibration resistance)
Work gloves to protect your hands from sharp edges

Most Ausom scooters share the same kickstand mounting bracket, so the universal scooter kickstand will work. If you own the ausom scooter dt2 pro or an off road electric scooter model, confirm the bolt spacing matches before ordering. You can grab the code for $50 off sitewide when shopping for replacement parts.

Step-by-Step Kickstand Replacement Process

Remove the Old Kickstand

Ausom electric scooter$1,149.00Image from the merchant

Flip your scooter on its side or lean it against a wall so you have clear access to the kickstand mounting area near the rear wheel.
Locate the mounting bolt that runs through the kickstand pivot. On the ausom electric scooter lineup, this is typically a single bolt with a nut on the opposite side.
Hold the nut steady with your adjustable wrench while turning the Allen bolt counterclockwise. If the bolt is seized from corrosion, spray penetrating oil and wait five minutes.
Slide the bolt out and remove the old kickstand along with any washers or spacers. Keep these parts; you will reuse them.

Install the New Kickstand

Position the new kickstand in the mounting bracket, aligning the hole with the scooter frame.
Insert any spacers or washers you removed earlier in the same order. These prevent side-to-side play.
Thread the bolt through the kickstand and frame, then hand-tighten the nut on the opposite side.
Test the kickstand motion before fully tightening. It should swing smoothly without binding. If it feels stiff, check that no washers are pinched.
Tighten the bolt firmly but avoid over-torque, which can crack the mounting bracket or deform the kickstand pivot.
Apply a small drop of threadlocker to the bolt threads if you ride frequently on rough terrain. This prevents vibration from loosening the hardware.

Adjusting Kickstand Height and Angle

After installation, test your scooter on level ground. The kickstand should hold the scooter at a stable angle without tipping. If the scooter leans too far or feels unstable:

Check for bent mounting brackets on the frame itself. A damaged bracket will prevent proper alignment even with a new kickstand.
Verify the kickstand length matches your model. Some aftermarket kickstands are adjustable; loosen the set screw, extend or retract the leg, then re-tighten.
Inspect the spring tension if your kickstand has a return spring. Weak springs allow the kickstand to drop while riding, which creates a safety hazard at speed.

The Ausom L1 and similar commuter models perform best with a kickstand angle of roughly 70 to 75 degrees from horizontal. This keeps the scooter upright without excessive lean.

Maintenance Tips to Extend Kickstand Life

A few simple habits keep your kickstand working longer:

Lubricate the pivot point every few months with a light machine oil or silicone spray. Wipe away excess to prevent dirt buildup.
Park on solid surfaces whenever possible. Soft ground or gravel allows the kickstand to sink, stressing the pivot.
Retract the kickstand fully before riding. Dragging a partially deployed kickstand at the ausom l1 max speed will bend or break it quickly.
Check mounting bolts monthly for tightness. A loose bolt accelerates wear on both the kickstand and the frame threads.

Ausom K20 electric scooter — K20PLN 729.00Image from the merchant

If you own multiple scooters such as the k20 or an electric scooter with seat, keep a spare kickstand on hand. Replacement takes minutes when you have the part ready, versus waiting days for shipping after a failure.

When to Upgrade or Replace Your Scooter

Sometimes a broken kickstand signals bigger issues. If your scooter frame shows cracks near the mounting bracket, or if you have replaced the kickstand multiple times in a year, the frame itself may be fatigued. Commuter models like the ausom l1 electric scooter are built for durability, but heavy use or rough handling eventually takes a toll.

Before sinking money into repeated repairs, check the latest price on a replacement scooter. Newer models often include reinforced kickstands and improved mounting systems that resist the wear patterns common on older designs. We also recommend comparing the ausom l2 electric scooter if you need a longer-range option with similar build quality.

Ausom Caroma electric scooter charger — Caroma electric scooter charger$49.00Image from the merchant

For charging and accessory needs, the caroma electric scooter charger works across most Ausom models and provides a reliable backup if your original charger fails.

Final Checklist

Before your first ride after kickstand replacement:

Test the kickstand under load by parking the scooter and gently pushing it to confirm stability.
Verify the bolt is snug but not over-tightened.
Confirm the kickstand retracts fully and does not interfere with the rear wheel.
Inspect the mounting bracket for cracks or deformation.

A properly installed kickstand restores full parking function and prevents the tip-overs that can scratch your scooter or damage electronics. The entire job costs under $20 and takes less time than a coffee run, making it one of the easiest scooter maintenance tasks you can tackle at home.

Questions

Can I use any kickstand on my Ausom L1 electric scooter?

Most universal scooter kickstands fit the Ausom L1 as long as the bolt spacing and diameter match. Verify the mounting hole alignment before ordering, or choose a kickstand specifically labeled as compatible with Ausom models.

How tight should the kickstand bolt be?

Tighten the bolt until snug, allowing the kickstand to pivot smoothly without side-to-side wobble. Over-tightening can crack the mounting bracket or bind the kickstand, while too loose causes rattling and accelerated wear.

Why does my new kickstand feel stiff?

Stiffness usually comes from pinched washers, misaligned spacers, or a bolt tightened before confirming smooth motion. Loosen the bolt, reposition the washers, test the swing, then retighten.

How often should I replace my scooter kickstand?

Replace the kickstand when it no longer holds your scooter upright, shows visible bends or cracks, or drags while riding. With proper care and lubrication, a quality kickstand can last several years of daily commuting.

Can I ride my Ausom scooter without a kickstand?

Yes, the scooter will function normally, but parking becomes inconvenient and you risk scratching the scooter by laying it down. A missing kickstand also makes quick stops harder since you cannot easily prop the scooter upright.