How to Use the DIY Taba Squishy Kit for Beginners

A diy taba squishy kit is the easiest way for beginners to make their own satisfying, squeezable toys at home with no special tools required.

Updated 4 Aug 2026 4 min read 7 sections

TABASQUISHY DIY taba squishy kit with make-your-own squishy materials — Diy taba squishy kit$55.99Image from the merchant

A diy taba squishy kit gives beginners everything they need to build soft, satisfying squishies at home without hunting for materials separately. The kits come pre-loaded with a clear outer shell, filling options, and a seal mechanism, so your first attempt is far more likely to succeed than any fully DIY approach. This guide walks through setup, filling choices, the best designs to try, and how to care for your finished squishy.

What Comes Inside a DIY Taba Squishy Kit

Most kits follow a standard format, though the specific contents vary by design. Here is what you can generally expect:

A transparent or semi-transparent outer shell (usually silicone or soft PVC)
A small hole or plug system for filling
Pre-measured filling material such as foam beads, glitter, or gel
A sealing tool or adhesive patch
An instruction card

TABASQUISHY taba squishy kit with squishy-making supplies — Taba squishy kit$38.99Image from the merchant

The taba squishy kit sold through TabaSquishy includes all of these components and is designed so that kids and adults can complete the build in one short session. If you want a sparkling result, look for kits that include glitter fill, like the glitter dumpling variant, which adds visual interest every time you squeeze it.

Step-by-Step: How to Make a Taba Squishy at Home

Follow these steps for a clean, bubble-free result on your first build.

TABASQUISHY dumpling squishy glitter toy with sparkling glitter detail — Dumpling squishy glitter$15.99Image from the merchant

Lay out your workspace. Use a flat, clean surface. A silicone mat or sheet of parchment paper keeps loose fill from scattering.
Inspect the shell. Check for any pre-existing cracks or weak seams before adding fill.
Open the fill port. Most shells have a small plug at the base. Remove it gently to avoid tearing the silicone.
Add your filling gradually. Pour or spoon filling in small amounts, pausing to press it toward the shell edges. Rushing this step causes air pockets.
Mix in extras. This is where glitter, small foam stars, or colored water beads go in. The dumpling squishy glitter design is a great reference for how layered fills look when done well.
Seal the port. Press the plug firmly back in, or apply the adhesive patch if your kit uses one. Hold pressure for 30 seconds.
Test the squeeze. Gently compress the squishy and check that the seal holds before handing it to a younger maker.

Pro tip: If the shell feels stiff, warm it briefly in your hands before filling. This makes the silicone more pliable and reduces the chance of a split seam.

Choosing Your Fill: Glitter, Beads, and Beyond

The filling you choose changes the look, weight, and sensory feel of the finished toy. Here is a quick comparison of the most common options:

Fill Type	Texture Feel	Visual Effect	Best For
Foam micro-beads	Soft, light	Minimal	Classic squishy feel
Glitter + water gel	Smooth, heavier	Sparkle effect	Display pieces
Mixed beads + glitter	Crunchy-soft blend	Colorful + sparkle	Sensory play
Foam chips	Chunky, bouncy	Opaque	Stress relief

TABASQUISHY duck squishy soft toy in a cute duck shape — Duck squishy$13.99Image from the merchant

Kits themed around specific characters tend to dictate the fill. The duck squishy and axolotl squishy styles, for example, pair best with lighter foam bead fills that let the character shape stay defined. Heavier gel fills work better in round-shell designs like the dumpling toy or gold dumpling, where the weight adds a satisfying heft.

Best Designs for Beginners

Not every shell shape is equally forgiving on a first build. Round or oval shells with a single fill port are the easiest to work with because they have fewer seams and tolerate overfilling better.

TABASQUISHY taba squishy cat soft toy in a cute cat shape — Taba squishy cat$14.99Image from the merchant

dumpling squishy – A rounded shape with minimal seams, ideal for a first attempt
taba squishy cat – Slightly more complex ears require careful fill distribution but are very rewarding
duck squishy – A compact, beginner-friendly size with a single port
axolotl squishy – The frill details make it a crowd favorite once you have one build under your belt
glitter dumpling / dumpling squishy glitter – Perfect if you want a showy result with minimal extra effort

If you are shopping for a starter pack that includes multiple shell options, taba squishies bundle packs let you experiment with several shapes in one order. You can also grab a discount code before you check out to bring the total down.

Fixing Common Beginner Mistakes

Air bubbles in the fill Tap the filled shell gently on the table to settle the contents before sealing. If a bubble is large, unseal, add a small amount of fill, and reseal.

Seal keeps popping open The port area may have residual fill on it. Wipe the rim clean with a dry cloth before pressing the plug back in.

Shell feels under-filled and saggy Add fill in small increments until the shell holds its shape when set down flat. Over-correcting is easier to fix than under-filling.

Glitter clumping at the bottom Shake the sealed squishy gently before each use to redistribute the glitter. This is especially worth noting with the gold dumpling, which uses a metallic fill that settles quickly.

How to Care for Your Finished Squishy

A well-sealed taba squishy can last for months with basic care.

Keep it away from sharp objects and rough surfaces that can puncture the shell
Store in a cool, dry place out of direct sunlight, which can fade glitter fills over time
Wipe the outside with a damp cloth only, never submerge it in water unless the kit specifies it is waterproof
Check the seal every few weeks with light pressure; re-seal promptly if you notice any give around the port

Who Is the DIY Taba Squishy Kit Best For?

This type of kit suits a wide range of people and situations:

Kids aged 6 and up who want a hands-on craft that finishes quickly
Parents and educators looking for low-mess sensory activities
Squishy collectors who want custom fills they cannot get in a pre-made toy
Gift-givers who want something interactive rather than a plain toy

For anyone comparing the store’s options before buying, check the latest prices and the current discount code to see which kits are best value right now.

Questions

What is included in a diy taba squishy kit for beginners?

Most kits include a soft silicone or PVC shell, a fill port or plug, your choice of filling material (such as foam beads or glitter gel), a sealing tool or adhesive patch, and a basic instruction card. Everything you need to complete one squishy is usually in the box.

Can I make a taba squishy without glue?

Yes. The kits are designed with a plug or patch seal system, so no glue is required. The plug is pressed firmly into the fill port and held in place by friction and the pressure of the fill inside the shell.

Which taba squishy designs are easiest for first-time makers?

Round or oval shells like the dumpling squishy are the most forgiving because they have fewer seams and are harder to overfill incorrectly. The duck squishy is another good starter shape due to its compact size and single fill port.

How do I stop glitter from clumping inside my squishy?

Give the sealed squishy a gentle shake before each use to redistribute the glitter fill. Storing it upright rather than flat also helps keep metallic or glitter fills spread more evenly.

Is the taba squishy kit available on Amazon?

TabaSquishy sells its kits directly through its own store. Buying direct means you can use a discount code for savings, which you can find on our coupon page at /tabasquishy-discount-code.

What age is the diy taba squishy kit suitable for?

Most kits are suitable for children aged 6 and up with light adult supervision for the sealing step. Adults and collectors also use them to create custom fills not available in pre-made squishies.